Lighting track 3F XTS4200-3 2m white
Lighting with the lighting track application allows to separate zones inside your interior. Thanks to this it is possible to switch on selected groups of luminaires separately and to illuminate selected surfaces depending on the activities performed.
Systems with the use of lighting track have been used for a long time to illuminate the exhibition in shopping centers, but it is more and more often chosen by our customers in home's interiors. Lighting based on busbars enables a rich arrangement, and their design fits perfectly into modern interiors.
To create the simplest lighting track-based system, you need three elements: a busbar, power connector and a plug. However, if the layout you want to create is more complex, then you can use connectors in the shape of letters: L, T and X. Busbars can also be hung on the cables from the ceiling. In this case, you need SKB12 handles and SKB slings available in 1500mm and 3000mm lengths.
Before buying the system, it is worth making at least a simple technical drawing, taking into account: length of busbars, their arrangement, place of power source, number of planned lighting fixtures attached to busbars.
After choosing the lighting track length, you should obtain a power supply, mounting plates, endings and connectors if your lighting design is more extensive.
The final construction step is the selection of lighting fixtuers that will be attached to the busbars. The ability to adjust the angle of inclination of light causes that the desired zones will be properly illuminated. Adapters must be purchased to mount the lighting fixtuers.
Most often the installation is surface-mounted, however, thanks to SKB slings, suspended mounting is possible.
Is it possible to cut the lighting track?
Yes, it is. It is possible to cut the lighting track according to required length.
Can the lighting track be connected to each other?
Yes, you can create complex systems using special connectors.
Can the lighting fixture mounted in it be moved?
Yes, the system was created in order to be able to arrange the lighting freely.
How to choose the right accessories?
To choose components, please contact us. A simple technical drawing taking into account the length of lighting track, their arrangement, location of the power source, the number of planned lighting fixtures on the rails will be helpful.
Can additional luminaires be attached to the ready system with time?
Yes, for this you should remember to buy an adapter.
Where can I supply power to the lighting track system?
At the beginning of the busbar or elsewhere in the system.
Why should I choose a 3-phase lighting track?
The three-phase system allows independence thanks to three separate circuits. By clicking the switch the system activates only selected luminaires within the system.
- Connectors (external, internal) L, T, X