WALLE12 connector 180deg
|maximum tape width:|
B slide (transparent, frosted, opal), C click (transarent, opal), D click (opal)
|kind of profile:|
WALLE12 is a wall aluminum profile for LED light sources on the basis of which a modern luminaire can be created. This profile model, thanks to its shape, perfectly replaces the ceiling molding, which, when used with the right LED strip, allows not only to elegantly finish the interior, but also to energy-efficiently illuminate it.
Lighting using the WALLE12 LED profile provides a unique atmosphere and decorate the interior of the living room or bedroom. WALLE12 LED profile can be mounted with screws or assembly glue.
Thanks to the available 90st angle connectors in the color of the profile, it is possible to finish the luminaire aesthetically without having to cut the profiles at an angle. However, using the WALLE12 180deg connector you can get a straight line of any length.
WALLE12 LED aluminum profile is available in three colors: white, silver anodized aluminum and raw aluminum. Matching color endings can be selected for each profile. The compatible covers and endings protect the stripe against dirt and mechanical damage. If you want to install a strip much longer than 2 meters, it is recommended buying the C click opal shade in a 20m roll. Using C opal cover it is possible to obtain a contiuous light line without any gaps through which light sometimes penetrates the covers connetion.
In addition to the aesthetic function, the aluminum profile is to serve as a heat sink that is designed to extend the life of the LED strip, protecting it from excessive overheating. Ceiling moldings made of polystyrene available on the market do not dissipate heat!
Profile installation and dedicated accessories for the WALLE12 LED profile are shown in the catalog sheet.
- B slide cover (transparent, frosted, opal)
- C click cover (transparent, opal)
- D click cover (opal)
- WALLE12 - compatible with the C click cover
- WALLE12 D - compatible with the D click cover
DEDICATED ALUMINUM COVERS:
- WALLE12 cover – (white, raw aluminum, anodized aluminum) - closes profile
- WALLE12 connector 90 deg (white, raw aluminum, anodized aluminum)
- WALLE12 connector 180 deg (stainless steel)
HOW TO CHOOSE THE DIFFUSER COVER CORRECTLY:
The covers differ in the material they are made from and the transparency degree. Due to this differentiation it is possible to plan the light dispersion and obtain the desire light effect. The transparent cover absorb the least light, next is frosted and opal.
GOOD TO KNOW
the opal slide-in diffuser cover embedded in a sufficiently deep aluminium profile (e.g. SMART10, SMART16, LINEA20), in combination with LED strip of at least 120 p/m allows to achieve the effect of a continuous light line.
Slide cover (signifying: A, B, E, G, H, J, A9) – made of plastic with three transparency levels (transparent, frosted and opal). It is necessary to insert diffuser cover from the beginning of the profile and drag along the marked socket or click into the Slick socket.
Click cover (signifying: C, C1, C2, C3 D, F, I, K, C9) – its assembly and disassembly is more convenient. It is recommended to choose this type of diffuser cover if the aluminium profile is mounted in a recess or other hard-to-reach places.
PROFILE NAME MARKINGS: