|kind of profile:|
Z flexible mounting plate, cone Z mounting plate
A slide (transparent, frosted, opal), C2 click (transparent, opal)
|maximum tape width:|
SMART-IN AC2/Z LED profile 1000 raw aluminum
Subtle, yet visible, decorative and yet functional - this should be lighting dedicated to stairs, furniture and interiors in which lighting should be a subtle decoration.
SMART-IN10 LED profile in 1m section is made of raw aluminum.
Using a LED strip with a high density of LEDs (minimum 120p/m) and a opal cover it is possible to achieve the effect of a continuous line of light without visible LED points.
SMART-IN10 LED profile has a Slick socket that allows you to use A slide cover (transparent, frosted, opal). This is important when the profile is to be mounted in a place where it is not possible to slide the cover in. The C2 click cover (opal) is particularly easy to assemble and disassemble.
It is recommend to mount the SMART-IN10 LED profile using dedicated Z cone flexible mounting plate (Z cone flexible mounting plate – veneering the profile with the mounting surface; Z mounting plate is keeping the profile with a gentle distance from the mounting surface).
In addition to the aesthetic function, the profile is to serve as a heat sink that is designed to extend the life of the LED strip, protecting it from excessive overheating. On the other hand, the compatible cover and ending caps protect the strip against dirt and mechanical damage.
- Z cone flexible mounting plate
- Z flexible mounting plate
- A slide cover (transparent, frosted, opal)
- C2 click cover (opal)
- SMART-IN10 with hole ending
HOW TO CHOOSE THE DIFFUSER COVER CORRECTLY:
The covers differ in the material they are made from and the transparency degree. Due to this differentiation it is possible to plan the light dispersion and obtain the desire light effect. The transparent cover absorb the least light, next is frosted and opal.
GOOD TO KNOW
the opal slide-in diffuser cover embedded in a sufficiently deep aluminium profile (e.g. SMART10, SMART16, LINEA20), in combination with LED strip of at least 120 p/m allows to achieve the effect of a continuous light line.
Slide cover (signifying: A, B, E, G, H, J, A9) – made of plastic with three transparency levels (transparent, frosted and opal). It is necessary to insert diffuser cover from the beginning of the profile and drag along the marked socket or click into the Slick socket.
Click cover (signifying: C, C1, C2, C3 D, F, I, K, C9) – its assembly and disassembly is more convenient. It is recommended to choose this type of diffuser cover if the aluminium profile is mounted in a recess or other hard-to-reach places.
PROFILE NAME MARKINGS: